Home  |  About Us  |  Roof Scan IR  |  Block Wall Scan IR  |  EnergyScanIR  |  Equine IR 
Electrical / Mechanical | DataCent IR | Marine IR | Clinical IR | Moisture IR | Custom IR
B2B | Testimonials | Partners/Organizations | Press |  Contact Us
 
RoofScanIRTM
 
IR SERVE is an Authorized Contractor in the RoofScanIR Network.  We have received intensive training and certification in the infrared scanning of flat and low-sloped roofs.  As a result, our clients receive the highest quality inspections and reports available in the industry!
 
 
 
 
Roof Scan
 
 
 
Infrared imaging is a proven method for identifying and defining moisture problems in your roof. This enables you to make informed decisions and will help develop your roof asset management program. Correct problem areas without the tremendous expense of replacing the entire roof.

As water enters your roof through the waterproofing layer(s) by tears, cuts, poorly sealed penetrations, failed flashings and caps, the insulation below can become laden with water and trapped in the roof substrate. If left in disrepair, the concrete deck absorbs or traps water, the wood deck rots. The metal deck rusts, and water intrudes into the building's interior. Infrared thermography is useful in locating these moisture intrusions.

By using infrared thermography, we find the trapped moisture and mark the wet areas so that repairs can
be made surgically. This can save you money because you may not have to replace the roof as soon.
By marking paint directly on the roof, repair areas can be seen by anyone standing on the roofs after
the survey is performed.

How it works

Roof ScanDuring the day, the sun radiates energy onto the roof and into the roof substrate, and then at night, the roof radiates the heat back into outer space. This is called radiational cooling. Areas of the roof that are of a higher mass (wet) retain this heat longer than that of the lower mass (dry) areas. Infrared imagers can detect this heat and "see" the warmer, higher mass areas, during the "window" of uneven heat dissipation. Heat loss and other IR services can be performed at the same time.

By using the information generated by a RoofScanIR report, the owner's roofing professional can recommend cost-effective removal and replacement of wet components and draw documents to prepare an adequate roofing substrate to receive a recover installation to extend the satisfactory roofing system's service life.

Roof Scan
 
 
Why RoofScanIR?

We create detailed, high-quality and easy to understand reports documenting roof moisture. Roof professionals can then use the information to verify the wet areas and write specifications to repair the roof.
 
  
 
 
And now, Aerial Infrared Scanning....
 
 
 
In conjunction with our friends at AITScan
 (div of Stockton Infrared Thermographic Services)
 
 
Call Us Today to Book Your Inspection 630-510-8458